Hokanson_NIVP3

Software For Arterial Inflow.

Hokanson NIVP3

The NIVP3 software for Arterial Inflow simplifies your test protocol and inflow calculations considerably. It is a Windows based application that will automatically run the plethysmograph and cuff inflator, and store your inflow waveforms. The software will also generate patient reports that are comprehensive, complete with plethysmographic waveforms, patient demographics and tabular data.

The instruments used for this test include the EC6, EC5R, or TL400 Strain Gauge Plethysmograph, in conjunction with the E20 Rapid Cuff Inflator.

For either single or multiple limb measurements, the NIVP3 software will automatically balance the strain gauge plethysmograph and control the E20 Rapid Cuff Inflator(s). The software allows you to choose your protocol for cuff inflation time, measurement time, and measurement interval.

Following waveform acquisition, the quantitative results are easy to obtain since the software makes the slope calculations for you.

The NIVP3 software requires the following hardware:

PC with 16 Mb of Ram and at least 20 Mb or free disk space. A 25 Mhz 486 processor or faster is recommended. Either com port 1 or 2 must be available for connecting an instrument.

(click to enlarge)