|
The fetatrack
120+ is a small, lightweight, high sensitivity
pocket Doppler with built in foetal heart rate
processing. The 2MHz foetal Doppler probe is
ideal for use by a General Practitioner or
Midwife for routine antenatal foetal detection
and FHR monitoring.
The foetal heart
rate is displayed on a large LCD display with
the audio signal available to the user via the
built in loudspeaker or optional headset with
output level controlled by rotary volume
control. FHR traces are available by connection
of the serial output to the optional UltraTrace
2 PC compatible software.
|
The foetal signals are easily located
using the lightweight narrow beam
transducer while internal signal
processing minimises the noise
artefacts. The probe contains an
additional on/off control for ease of
use.
|
The
unit is powered by a standard 9V battery which
provides over 6 hours of use.
The
fetatrack 120+ meets all current EEC standards
for medical equipment.
Technical Specifications
|
Ultrasound |
|
|
2 MHz continuous wave |
|
|
2 crystal narrow beam |
|
|
<10mW/cm² SATA |
|
|
300Hz - 1 KHz |
|
|
Multipoint autocorrelator, 60 - 210 bpm |
|
Unit Controls |
|
|
2 Keys (for unit on / off.) |
|
|
Rotary volume |
|
|
3 digit FHR LCD Display
FHR Pulse Icon
Battery Low Icon
|
|
Power Supply |
|
|
MN1604 (PP3) 9V Alkaline Manganese |
|
|
>6 hours of use |
|
Connectors |
|
|
Audio output
to optional headset. |
|
|
RS232
interface to optional UltraTrace 2 PC
software |
|
Enclosure |
|
|
ABS |
|
|
150mm by
75mm |
|
|
Less than
295g |
|
Safety |
|
|
Class 1 Type
B - IEC 60601-1 |
|
