NOTE: Viking connectors are round with 4 pins.
NOTE: The MPC-500 is non-repairable and warranted for 30 days against defects in materials and workmanship.

	SPC-350	SPC-350S	SPC-360
Part Number	800-4019	800-4019-1	800-5019
Catheter Material	Polyurethane/ Woven Dacron	Polyurethane/ Woven Dacron	Polyurethane/ Woven Dacron
Effective Length	120 cm	120 cm	120 cm
French Size	5	5	6
Number of Sensors	1	1	1
Sensor Location from Tip	Side mounted at tip	Side mounted at tip	Side mounted at tip
Tip Characteristics	Curved	Straight	Curved
Connector Type	Viking	Viking	Viking
Reusable	Yes	Yes	Yes
Repairable	Yes	Yes	Yes

Slow-Speed Injection and Sampling
Approved for Human Use. Millar manufactures a range of Mikro-Tip pressure catheters with a lumen for fluid sampling or slow-speed injection; Available Sizes from 5 to 7 French. Models SPC-450 and SPC-450S are MRI compatible.

High-Speed Injection
Millar manufactures two models of single sensor catheters for high-speed injection. The lumen has two laterally opposed side openings on the SPC-471A. The SPC-474A has an open-end pigtail extension for use with a .032 inch (.8 mm) guide wire. Typical injections rates of radiopaque contrast dye (Renografin 76) at 1200 psi (8274 kPa) are 10 to 15 ml/sec. The SPC-471A injection lumen side openings are located 1 cm from the tip, and the model SPC-474A injection lumen is located 1 cm from the pigtail attachment.

NOTE: Viking connectors are round with 4 pins.

Non-Invasive Pulse Probe Tonometer

A hand-held probe equipped with a standard Mikro-Tip® pressure sensor at the tip, the SPT-301 was designed for non-invasive recording of pulse pressure wave contour. The high frequency response ensures accurate reproduction of pulsatile waveforms.